Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2016, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 13 Jun 2016 08:55:08 -0500
Reply-To:     Skip Laubach <skiplaubach@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Skip Laubach <skiplaubach@GMAIL.COM>
Subject:      Re: lube rear heater assembly
Comments: To: Mike South <msouth@GMAIL.COM>
In-Reply-To:  <CAN483vcLryCBoNb=2oNoEN0U_AW1LJgbk0X6=Z0oaN1UmsvyPQ@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

Hi Mike, Your 1.9 (now a 2.2) is working well. Thanks again for your gift.

I formerly was with the company that made Zoom Spout Oiler. It's a basic light oil. It's feature is the long plastic spout that reaches into deep dark places. Available at Grainger.

Good luck, Skip '84 Westy

Sent from my iPhone

> On Jun 13, 2016, at 8:22 AM, Mike South <msouth@GMAIL.COM> wrote: > > Hi, > > I have a rear heater to replace the one that caught fire. I do not want > this one to catch fire. I'm wondering what people recommend for lubing > this thing. > > Here are pictures: > > http://imgur.com/a/QF6xY > > Short version: I have it out of the van, pre-install. I am going to put > lubrication on the ends of the axles that you can see in the pictures. I > would like list input on this plan. > > Here's the result of my research on this: > > I found descriptions in the archives of how to take it apart (this is for > the front one, I'm guessing you could adapt or use as-is for the back): > > http://gerry.vanagon.com/cgi-bin/wa.exe?A2=ind1201C&L=vanagon&P=R1451 > > This is more than I want to get into, unless it's my only hope. > > The fan that I bought turns with little effort but it does not keep > spinning if I am not pushing on it. > > In the pictures (referring to my pictures, from the imgur link above > http://imgur.com/a/QF6xY ) I have a shot of the end of the axle from each > side. > > From reading the archives, I see people recommending the ZOOM spout oiler > > http://www.laco.com/lubricants/zoom-spout-oiler/ > > And there were also a few recommendations for Marvel Mystery Oil: > > http://www.walmart.com/ip/Marvel-Mystery-Oil-32oz/16889008 > > Sounds like the ZOOM stuff is made for exactly this kind of application. > > Any thoughts? > > I'm also thinking of doing the Mullendore port ( > http://www.thesamba.com/vw/forum/viewtopic.php?t=386923) for the front > blower. Can't remember if I lubed it when I had it out, and more lube > won't hurt. > > One thing I would like to know from those that have worked on these is > whether I should expect the fan to keep turning if I give it a push, or if

> it's normal that it requires continuous force to keep it moving. That > could at least give me some information on whether the lube is doing > anything. > > I really appreciate you guys and all the wisdom you've dispensed over the > years. > > mike


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.