Alistair: You can do both … incorporate the logo into the high-mounted brake light. > On 18-Jun-2016, at 12:46, Alistair Bell <albell@SHAW.CA> wrote: > > Despite my knack for whacking my head on things, I haven't done it yet on that edge. A matter of time I guess. > > Good idea about logo etc on the brace. My mind was on the " high mounted brake lights could maybe be incorporated " track and I didn't think of logo. > > My mill is all manual, but it would be easy to take a blank to local cnc router, or waterjet, guys and have something done. > > It never ends does it? > > Cheers > > Alistair > > > >> On Jun 17, 2016, at 9:28 AM, Neil N <musomuso@gmail.com> wrote: >> >> Thanks for posting that Alistair. >> One thing I've been meaning to to is take the flippin' edge "off" the >> lower outer corner >> of that shelf. I can't count how many times I've bumped my head on it >> while working in >> the engine area. I'd almost be tempted to add a return on that plate >> to cover that >> edge. Use a piece of angle aluminum? It would provide an edge to catch >> on when removing >> large items though. Grind edge to a 45º. >> >> re: weight reduction on new piece. Can you carve out "Westfalia" or VW >> or something of >> that ilk? Bell Industries could have a nice market niche. Add support >> between midpoint of >> plate and ceiling metal if need be? Of course if that's needed, >> somethings really wrong >> or failing with the cabinetry? >> >> Neil. >> >>> On 6/17/16, Alistair Bel <albell@shaw.ca> wrote: >>> >>> Made a brace to stiffen up the rear edge of my Westy overhead rear shelf. >> -- >> Neil n >> >> Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca> >> >> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy> >> >> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/> >> >> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.