Date:         Fri, 17 Jun 2016 09:28:04 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Westy rear shelf support
Comments: To: Alistair Bel <albell@shaw.ca>
In-Reply-To:  <426A28B0-7556-4C01-B5BA-A9DD8AC98160@shaw.ca>
Content-Type: text/plain; charset=UTF-8

Thanks for posting that Alistair.
One thing I've been meaning to to is take the flippin' edge "off" the
lower outer corner
of that shelf. I can't count how many times I've bumped my head on it
while working in
the engine area. I'd almost be tempted to add a return on that plate
to cover that
edge. Use a piece of angle aluminum? It would provide an edge to catch
on when removing
large items though. Grind edge to a 45º.

re: weight reduction on new piece. Can you carve out "Westfalia" or VW
or something of
that ilk? Bell Industries could have a nice market niche. Add support
between midpoint of
plate and ceiling metal if need be? Of course if that's needed,
somethings really wrong
or failing with the cabinetry?

Neil.

On 6/17/16, Alistair Bel <albell@shaw.ca> wrote:

> Made a brace to stiffen up the rear edge of my Westy overhead rear shelf.
-- 
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>