The properties of brake fluid make it a frequent topic of discussion, and you know it makes me wonder just how much or little thought has been put into its continued use. Brake fluid absorbs water from the environment. This water then causes corrosion in the system, brake fade when the brakes get hot, it might increase dissolved gases in the fluid. I've never seen old brake fluid bled out that wasn't filthy. Where's that from? What is it about brake fluid that makes it indispensable to a braking system? Isn't just about a certain level of viscosity? If that's so can't something better be substituted for it? That said, there is a wide variation in the wet/dry boiling points of brake fluid. Even within one DOT rating. The vanagon uses dot 4, but dot 5.1 can also be used and is compatible with dot 4, and has a wet boiling pt. MINIMUM of 180C. For some reason the high boiling point stuff, even though it's the same chemistry as dot 4 in general, is much more expensive. You're better off being diligent about changing your brake fluid regularly.
-- There's no .sig like the present |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.