Date:         Sat, 2 Jul 2016 12:43:33 -0400
Reply-To:     Dennis Jowell <dennisjowell@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Jowell <dennisjowell@GMAIL.COM>
Subject:      Re: GOWESTY AFM no start problem
Comments: To: Neil N <musomuso@GMAIL.COM>
In-Reply-To:  <CAB2Rwfh6BjRrCo5jgzMBq=jyzX3u2QrcL3XSZ4bGMY5ic4sJ6g@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

Idle was fine just following GOWESTY's instructions.

Dennis J


> On Jul 2, 2016, at 11:59 AM, Neil N <musomuso@GMAIL.COM> wrote:
>
> "easier" to do for "lazy" folks like me?   ;)
>
> I think some do it this way because their engines have a poor idle.
> But an idle issue can often be resolved and should be addressed first
> I think.
>
> Neil.
>
>> On 7/2/16, Dennis Haynes <d23haynes57@hotmail.com> wrote:
>>
>> .... Someday I will figure out why some folks
>> think it is better this way than to follow the Bentley.
>
>
> --
> Neil n
>
> Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>
>
> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>
>
> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>
>
> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>