Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2016, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 5 Jul 2016 16:26:24 -0700
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Re: Removing top
Comments: To: Stuart MacMillan <stuartmacm@GMAIL.COM>
In-Reply-To:  <01dc01d1d703$0af88d30$20e9a790$@gmail.com>
Content-Type: text/plain; charset=utf-8

It might not be necessary to mark the hinge location but it makes things a whole lot easier. I've dealt with a couple of vans that had slightly ill fitting top and they were a pain to correct.

Agree about the lifting bar check.

Alistair

> On Jul 5, 2016, at 2:20 PM, Stuart MacMillan <stuartmacm@GMAIL.COM> wrote:

> > It's not necessary to mark the hinge. Leave the bolts a bit loose, but not too loose, close the top and line it up with the luggage rack so it fits perfectly, then raise the top just enough to tighten the front bolt and close and check alignment. Raise further to tighten the others. Usually only a bit of sideways adjustment is necessary. > > Now is a good time to check your lift bar for wear. The upper part should not be visible (sticking out) when looking at the hinge open. If it is, the cross bar is being cut through and will eventually fail and the top will hit you on the head. > > I fixed mine by welding the gap and grinding. David Beierl was more sophisticated but either method works. https://picasaweb.google.com/117189706757545167023/VanagonPopTopHingeTroubles?noredirect=1#5497921924520735490 > > Stuart > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Edward V Barger > Sent: Tuesday, July 05, 2016 1:31 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Removing top > > the van is being painted so will not have a way to mark the hinge plate position > > any ideas how to get the hinge plates back in the old position or will it just be trial and error ?? > > ed > Edward V Barger > edvbarger@mac.com <mailto:edvbarger@mac.com> > 310 922 6251 > >> On Jul 5, 2016, at 12:53 PM, Alistair Bell <albell@SHAW.CA> wrote: >> >> Oh and one more thing. Mark the position of the hinge plate to the van so you can get the roof back in the same position . >> >> Alistair >> >>> On Jul 5, 2016, at 11:24 AM, Edward V Barger <edvbarger@MAC.COM> wrote: >>> >>> HI >>> >>> Need to help my body shop person remove the pop top for painting >>> >>> just did a web search and did not find any thing on removing the entire pop top ….. lots on replacing the cloth >>> >>> any one know the weight planning on having 3 of us to remove it will it be too heavy for only 3 people ? >>> >>> any one know the weight ? >>> >>> >>> ed >>> Edward V Barger >>> edvbarger@mac.com <mailto:edvbarger@mac.com> >>> 310 922 6251


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.