Date:         Fri, 1 Jul 2016 13:50:48 -0700
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Re: Propex install finished
Comments: To: Stuart MacMillan <stuartmacm@gmail.com>
In-Reply-To:  <014001d1d3ca$27fd6ef0$77f84cd0$@gmail.com>
Content-Type: text/plain; charset=us-ascii

I'll take idiosyncratic over the the options :-)

I worry about the aluminum bezel getting hot enough to distort or even melt the vinyl of the console. I'll find out soon enough.

To be honest, the console mod is a stop gap. I have other ideas, a better console. Low profile etc.

Alistair

> On Jul 1, 2016, at 11:55 AM, Stuart MacMillan <stuartmacm@gmail.com> wrote:
> 
> Suffice it to say it's idiosyncratic.  And the elegant turned aluminum bezel
> is a pure Alistair touch!
> 
> Don't melt the Porta Potti! ;-)
> 
> Stuart
> 
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of

> Alistair Bell
> Sent: Friday, July 01, 2016 11:37 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Propex install finished
> 
> Last part of my install posted here
> 
> https://shufti.wordpress.com/2016/07/01/vanagon-propex-heater-install-part-i
> ii/
> 
> I won't go as far as to say it's a controversial approach, but it is
> different.
> 
> Alistair =
>