Date:         Fri, 8 Jul 2016 12:45:51 -0400
Reply-To:     Eric Caron <ecaron1@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Caron <ecaron1@COMCAST.NET>
Subject:      Belt advice
Content-Type: text/plain; charset=utf-8

Hi folks,

Not the advice that my belt is getting a bit tight around my middle.  I need advice on my waterpump belt.

I got my van back from a check up and was told the belt was fine and needed just a bit of belt dressing.

Still the belt squeaks at cold start up every time and stops after a few minutes.  Doesn’t make noise once warmed up. 

At least one fellow VW owner looked and said it seemed a bit loose.

At the check up I was told if it was tightened it would damage bearings. 


So, do I get the belt changed and tightened or just put on belt dressing?

The belt was put on in 2013 about 9,000 miles ago.  I think it has chirped a bit most of this time certainly the last year.

Friend says my belt shows some wear and small cracks.  Shop didn’t recommend any work on it though I specifically asked about it.

thanks.

Eric Caron 
85 GL Auto Westfalia