The '86 Westy I pulled the radiator from is in very nice condition, and still mostly complete. It has been rear-ended, but front 2/3rds look good. The owner had originally intended to transfer westy roof and interior to a plain Vanagon. However, after searching for nearly a year he only ended up with a pretty run down Vanagon. (these seem not nearly as well taken care of on average compared to campers). Therefore the current part-out plan. I have a Westy with a rough front end (was hit some years ago, and only passably repaired). How hard is it to combine the front 2/3rds with the rear 1/3? Due to the westy roof I was guessing a cut would be through the rear pillars wold be the best. Second cut maybe just behind sliding door. How difficult would this be? Advisable? (Some years ago I had the opportunity to pick up a low milage Westy inĀ Germany that had front damage. Here maybe a front clip would have worked.) Martin |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.