Date: Wed, 3 Aug 2016 17:54:47 -0700
Reply-To: Alistair Bell <albell@SHAW.CA>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Alistair Bell <albell@SHAW.CA>
Subject: Re: Color question for brown interior paint
In-Reply-To: <2AF65809-F3FD-4739-AFD5-41FFC30FBFB2@eoni.com>
Content-Type: text/plain; charset=utf-8
Thanks Jim. It's does sort of ring a bell. I'm on it, will report back.
Thanks again
Alistair
> On Aug 3, 2016, at 5:45 PM, Jim Arnott <jrasite@EONI.COM> wrote:
>
> Looked all over for it and right after I sent the below, I found the can. 2436 Satin Espresso.
>
> Jim
>
>> On Aug 3, 2016, at 5:23 PM, Jim Arnott <jrasite@EONI.COM> wrote:
>>
>> The only brown they have is satin espresso.
>>
>> Jim
>>
>>
>>> On Aug 2, 2016, at 9:25 PM, Alistair Bell <albell@shaw.ca> wrote:
>>>
>>> Don't recall the name of the shade do you?
>>>
>>> Alistair
>>>
>>>> On Aug 2, 2016, at 6:56 PM, Jim Arnott <jrasite@EONI.COM> wrote:
>>>>
>>>> I found a Krylon Fusion satin brown that was pretty close.
>>>>
>>>> Jim
>>>>
>>>>
>>>>> On Aug 2, 2016, at 9:41 AM, Alistair Bell <albell@SHAW.CA> wrote:
>>>>>
>>>>> I'm in same boat as Eric, wanting to repaint stove face. I've searched on samba and found that paint code RAL 8028 was recommended ( and pics confirm) as close match to the factory brown.
>>>>>
>>>>> But I also seem to recall reading somewhere about a krylon rattle can colour that was a good match. Haven't found the ref yet.
>>>>>
>>>>> Alistair
>>>>>
>>>>>> On Aug 2, 2016, at 7:09 AM, Eric Caron <ecaron1@COMCAST.NET> wrote:
>>>>>>
>>>>>> Hi folks,
>>>>>>
>>>>>> Here in Bennington VT I have few options for finding rattle can colors. I have Home Depot, Kmart or Walmart.
>>>>>>
>>>>>> Can anyone give me a common brand and number for the brown interior of a 85?
>>>>>>
>>>>>> I took the back grate off behind my stove to run some wires and it was pealing and had some rust under the paint.
>>>>>>
>>>>>> I have a ride tomorrow and a person that could spray it. I just need the color.
>>>>>>
>>>>>> I’ll use black in a pinch but would prefer a close match to the original.
>>>>>>
>>>>>> A bonus is that I found that a rivet had given out and that was supposed to hold the grate to the stove unit. I recognized the tapping sound it made as one of the sounds i hear on rough roads. I’m always trying to eliminate unnecessary rattles and vibrations. A small screw now is fitted to that location.
>>>>>>
>>>>>> Thanks for any color recommendations.
>>>>>>
>>>>>> Eric Caron
>>>>>> 85 GL Auto Westfalia
>>>
|