Date: Wed, 3 Aug 2016 17:45:23 -0700
Reply-To: jrasite@EONI.COM
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jim Arnott <jrasite@EONI.COM>
Subject: Re: Color question for brown interior paint
In-Reply-To: <964DDCE3-5F04-42D9-A63C-BD01612B90BE@eoni.com>
Content-Type: text/plain; charset=utf-8
Looked all over for it and right after I sent the below, I found the can. 2436 Satin Espresso.
Jim
> On Aug 3, 2016, at 5:23 PM, Jim Arnott <jrasite@EONI.COM> wrote:
>
> The only brown they have is satin espresso.
>
> Jim
>
>
>> On Aug 2, 2016, at 9:25 PM, Alistair Bell <albell@shaw.ca> wrote:
>>
>> Don't recall the name of the shade do you?
>>
>> Alistair
>>
>>> On Aug 2, 2016, at 6:56 PM, Jim Arnott <jrasite@EONI.COM> wrote:
>>>
>>> I found a Krylon Fusion satin brown that was pretty close.
>>>
>>> Jim
>>>
>>>
>>>> On Aug 2, 2016, at 9:41 AM, Alistair Bell <albell@SHAW.CA> wrote:
>>>>
>>>> I'm in same boat as Eric, wanting to repaint stove face. I've searched on samba and found that paint code RAL 8028 was recommended ( and pics confirm) as close match to the factory brown.
>>>>
>>>> But I also seem to recall reading somewhere about a krylon rattle can colour that was a good match. Haven't found the ref yet.
>>>>
>>>> Alistair
>>>>
>>>>> On Aug 2, 2016, at 7:09 AM, Eric Caron <ecaron1@COMCAST.NET> wrote:
>>>>>
>>>>> Hi folks,
>>>>>
>>>>> Here in Bennington VT I have few options for finding rattle can colors. I have Home Depot, Kmart or Walmart.
>>>>>
>>>>> Can anyone give me a common brand and number for the brown interior of a 85?
>>>>>
>>>>> I took the back grate off behind my stove to run some wires and it was pealing and had some rust under the paint.
>>>>>
>>>>> I have a ride tomorrow and a person that could spray it. I just need the color.
>>>>>
>>>>> I’ll use black in a pinch but would prefer a close match to the original.
>>>>>
>>>>> A bonus is that I found that a rivet had given out and that was supposed to hold the grate to the stove unit. I recognized the tapping sound it made as one of the sounds i hear on rough roads. I’m always trying to eliminate unnecessary rattles and vibrations. A small screw now is fitted to that location.
>>>>>
>>>>> Thanks for any color recommendations.
>>>>>
>>>>> Eric Caron
>>>>> 85 GL Auto Westfalia
>>
|