Just, use the tap, run it in until the bushing comes out. The tap bottoms out on the bell housing case and then the bushing comes out riding up the tap’s threads ! A little miracle !
> On Aug 10, 2016, at 12:00 AM, Automatic digest processor <LISTSERV@GERRY.VANAGON.COM> wrote: > > Nope, if it's not loose, leave it there. In the past I used a thread tap to > cut threads in the bushing, then screwed in a bolt the proper size and pried > it out. Cheers, Frank Condelli Almonte, Ontario, Canada '87 VW Westy, '00 Kawasaki 250 Sherpa, "98 Ducati 750 Monster & Lionel Trains (Collection for sale <http://frankcondelli.com/trainsal.htm>) Frank Condelli & Associates <http://www.frankcondelli.com/> - Vanagon/Vanagon Westfalia Service in the Ottawa Valley BusFusion <http://www.busfusion.com/> a VW Camper camping event, Almonte, ON, June 02 ~ 05, 2016 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.