I'm not sure how one hits his head on the retraction reel with it inside the cabinet. But there isn't any ideal solution to the 3-point restraint for the driver's side, so far as I can tell. I do on occasion let an adult sit in that position, but will not put a child seat there for my grandchildren. Only one of them can go in the van at a time, on the passenger side rear seat. The belts on both sides are properly installed per GoWesty instructions. I just don't trust the driver's side enough to put a grandchild there. On Wed, Aug 24, 2016 at 10:08 AM, David McNeely <davmcneely40@gmail.com> wrote: > I was told by a dealer that the VW 3-point cannot be installed in a > Campmobile. I installed the GoWesty 3-point system on both sides. Since > the driver side belt runs through the rear cabinet, the upper portion of > the cabinet cannot be used without interfering with the belt action. The > belt release locks up if anything is touching the belt in that area. It > also makes the seat more difficult to manipulate, as the belt binds on the > seat. The reels (or the reel covers anyway) are of poor quality. I don't > know whether I have improved safety for the driver's side passenger or > not. We seldom have anyone in the rear seat. I will not transport both my > grandchildren in the van at the same time, since I cannot put both car > seats in without using the driver's side rear passenger position, and I > don't trust that belt. > > On Wed, Aug 24, 2016 at 10:00 AM, Stuart MacMillan <stuartmacm@gmail.com> > wrote: > >> I don't see how the OEM system can work in a Westy on the cabinet side. >> >> Stuart >> >> -----Original Message----- >> From: Roy Nicholl [mailto:RNicholl@NBNet.nb.ca] >> Sent: Wednesday, August 24, 2016 9:52 AM >> To: Stuart MacMillan >> Cc: vanagon@GERRY.VANAGON.COM >> Subject: Re: 3 point harness on rear bench >> >> While the Go Westy solution is a simpler install, the VW 3-point harness >> for >> the rear bench provides a cleaner implementation. >> >> > On 24-Aug-2016, at 13:32, Stuart MacMillan <stuartmacm@GMAIL.COM> >> wrote: >> > >> > Go Westy. I've installed it on both sides and it works well, but it does >> limit the things you can put in the side closet a bit: >> http://www.gowesty.com/search-results.php?search_phrase=KT122-LHC >> > >> > Stuart >> > >> > -----Original Message----- >> > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On >> Behalf Of >> Neil2 >> > Sent: Wednesday, August 24, 2016 9:24 AM >> > To: vanagon@GERRY.VANAGON.COM >> > Subject: 3 point harness on rear bench >> > >> > Has anyone sourced an aftermarket 3 point harness for a '90 Westy rear >> bench seat? Or is there a Vanagon part number for such? >> > >> > Please/thanks! >> > >> > -- >> > Neil2 >> > '82 Diesel Westfalia (Ducky) >> > '86 Vanagon (SaVannah) >> > '08 170" 2500 Mega Roof Sprinter (Moby) >> > '90 Westfalia Subagon >> > Fulltiming since August 2008 >> > Nunquam Pendite Divendium >> > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.