Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (September 2016, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Thu, 22 Sep 2016 11:07:05 +0000
Reply-To:   Jim Felder <jim.felder@GMAIL.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Jim Felder <jim.felder@GMAIL.COM>
Subject:   Re: Injected grease into CV boot and it works
Comments:   To: Don Hanson <dhanson928@gmail.com>
In-Reply-To:   <CAHTkEuJL7mE_ybPh13Ex09pp9ZRd0MZf2s9j3Sqm8MWBM6vyYw@mail.gmail.com>
Content-Type:   text/plain; charset=UTF-8

Over the years I have performed the life-saving grease injection trick using a "syringe" made for the purpose, available at many auto parts store. It is a big needle, but on the back of it there is a a fitting that snaps into a standard grease gun nozzle. I don't carry a grease gun but do carry the needle in my toolkit so I could give my CVs a fix at any old lube shop.

Jim

On Wed, Sep 21, 2016 at 8:15 PM Don Hanson <dhanson928@gmail.com> wrote:

> Last weekend, at short notice, we were able to ramble across Oregon. Hood > River on the Columbia River to the Strawberry mountains on the south > eastern edge.. ended up being about 800 miles, lots of hills and a huge > headwind coming home along the Gorge..Rather than actually properly > removing my left axle to do that noisy side, at the 11th hour before we > left (getting wise about taking right off on a remote adventure after > fixing anything critical)..and of course the outer CV was the one making > noises...I rigged a short section of vacuum line to one of my SO's horse > syringes... Inserted that line through the boot with the help of a > screwdriver. I filled the syringe twice (one whole tube of CV grease) and > squeezed the grease on two "sides" of the joint... The vacuum line I cut to > length so it went into one of the spaces in the CV....It must have been > pretty dry, haven't serviced that side ever... I'll do it properly when I > do the wheel bearing soon. Anyway, It's now smooth and quiet, and I > didn't spoil a trip with a stripped or broken bolt at the last minute... >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.