Steve, The under-seat storage on my slide-in middle row captains seats have keys which look similar to my glovebox key (I have not checked to ensure the key way is the same). From what you indicated below, I should be able to have these all re-keyed the same?
> On 28-Sep-2016, at 02:08, Steve <vwcarlocks@HOTMAIL.COM> wrote: > > > > A few key and lock questions have been asked, so here we go. > > Slider handle can be rekeyed to match existing keys. > > In the key that must be pulled out, that generally indicates a worn key. If you have a copy made, it will just be another worn out key, but on new metal. It needs to be code cut back to new key specs. Filing the wafers is just a bad idea. It can allow multiple keys to operate the lock. The correctly cut key should solve the problem. > > The glove box key is a different key from ignition and doors. It is a single sided key and is the SC profile. A key can be made for the lock, but there are no code numbers on the locks. > > Feel free to email me if further explanations are needed. > > Steve Sandlin, Registered Locksmith > > Sent from my Verizon Wireless 4G LTE smartphone |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.