Lots of great options. I won’t get a chance to play with this until next week but all will be good now I’m sure. Leaning toward arm rest removal as the seat pushes a little on the slider. Also very easy to take off and put on again. Appreciatively, Eric Caron 85 GL Auto
> On Sep 29, 2016, at 2:16 PM, JordanVw@aol.com wrote: > > no need to remove the armrest. simply drill one hole in the bottom of the seat rail into the mount bracket and insert a self tapping screw. > > In a message dated 9/29/2016 6:56:38 A.M. Eastern Daylight Time, ecaron1@COMCAST.NET writes: > Perfect! I’ll try removing the arm rest first and drilling new holes second. thanks for the great info. this was just what I needed. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.