Date:         Thu, 6 Oct 2016 14:21:25 -0400
Reply-To:     Steven Johnson <sjohnso2000@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steven Johnson <sjohnso2000@GMAIL.COM>
Subject:      Re: Trouble with snorkel from AFM to TBH
Comments: To: Neil N <musomuso@gmail.com>
In-Reply-To:  <CAB2Rwfij92fMcie24o_+ZQ0XCP-2rABvfJL5vDJODMDtLhkPHw@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

Yes, this last time the snorkel popped completely off of the ATM and when
I finally stopped and got access to the engine compartment the air cleaner
had popped loose from it's connecter to the body and was tilted.   I know I
secured it the last time I was putting things back together.   But I did
fuss
some more with the snorkel because I thought it was looser than normal.

Thanks!

Steven

On Thu, Oct 6, 2016 at 1:27 PM, Neil N <musomuso@gmail.com> wrote:

> Is the air cleaner housing properly seated?
> The two studs at bottom of air cleaner housing should seat
> into holes at body metal (grommet at each hole)
>
>
> On 10/6/16, Steven Johnson <sjohnso2000@gmail.com> wrote:
>
> ....  I'm having difficulty getting the snorkel
> > that goes from the AFM to the Throttle Body Housing to stay attached on
> the
> > AFM
> > side.   It just slips off as I screw down the clamp.
>
> --
> Neil n
>
> Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>
>
> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>
>
> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>
>
> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>
>