Date: Sat, 8 Oct 2016 22:50:20 -0400
Reply-To: Eric Caron <ecaron1@COMCAST.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Eric Caron <ecaron1@COMCAST.NET>
Subject: Re: side door window knob tightening
In-Reply-To: <68ECC86C-C62A-47AE-96F1-0E4A7F73A9F5@shaw.ca>
Content-Type: text/plain; charset=utf-8
Hi alistair,
OK, it must be the latch to glass as the only place a flat screw driver goes is very tighte and I don’t want to break anything by pushing too hard.
So, I will try to see if it gives in the other direction and then reveals a way to tighten the latch to glass.
This is why I need a parts van. I hate feeling like I might be breaking something when I do things like this! I’d love to try things first on a parts van!
thanks, and wish me luck.
Eric Caron
85 GL Auto Westfalia
> On Oct 8, 2016, at 10:25 PM, Alistair Bell <albell@shaw.ca> wrote:
>
> Slot. So bent flat bladed driver will work. Or, one of those 1/4" drive short slot screw drivers. Don't use it in the handle, rather hold it with vise grips or better yet 1/4" socket and 1/4" ratchet wrench.
>
> If you find that tightening the screw doesn't fix things then what is going on is that the latch to glass connection is loose. So unscrew that screw, watch out for spring when you take the moveable part of latch off, then tighten fixed portion to glass. I think it's a hex socket headed screw, or might be Phillips. But that's easy to access
>
> Alistair
>
>
>> On Oct 8, 2016, at 6:57 PM, Eric Caron <ecaron1@COMCAST.NET <mailto:ecaron1@COMCAST.NET>> wrote:
>>
>> Hi Dan,
>>
>> I’m a blind vanagon owner and list member so I need a verbal description.
>>
>> I have some screw drivers that are bent sort of like a alen wrench,so they can go in tight places. The whole in the bottom of the latch is very small though. Are you saying it is a simple screw in there I need to tighten? Philips, flat, not a tiny allen head?
>>
>> I had tried a philips and it didn’t seem to grab anything.
>>
>> Thanks for any further details.
>>
>> Eric Caron
>> 85 GL Auto Westfalia
>>
>>> On Oct 8, 2016, at 7:53 PM, Dan N <dn92610@gmail.com> wrote:
>>>
>>> you need a curved screw driver like this
>>>
>>> https://www.amazon.com/TEKTON-2944-Offset-Screwdriver-3-Piece/dp/B000NY8OQU <https://www.amazon.com/TEKTON-2944-Offset-Screwdriver-3-Piece/dp/B000NY8OQU> <https://www.amazon.com/TEKTON-2944-Offset-Screwdriver-3-Piece/dp/B000NY8OQU <https://www.amazon.com/TEKTON-2944-Offset-Screwdriver-3-Piece/dp/B000NY8OQU>>
>>>
>>> tighten it under the latch...
|