Date: Wed, 26 Oct 2016 08:14:30 -0400
Reply-To: "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Subject: Re: Dimensions for A/C hoses
In-Reply-To: <1e976c77-4459-23a1-b734-e0dc5e2cb28c@v6bus.de>
Content-Type: text/plain; charset=UTF-8
Raimund, do you want to fabricate these hoses yourself or are you looking
for someone to make them up and send them to you? I can make custom AC
hoses and I have most of the stock Vanagon hoses sitting here on the shelf
to use as guides to make the new ones. Let me know if you would like me to
price out making up new hoses for you and shipping them to Germany. They
would all be brand new barrier style hoses suitable for R134a of course.
As for your leak, I would suspect the expansion valve as they have an end
piece that is epoxied in place (steel piece in an aluminum block) and over
time the epoxy can start to fail causing a leak in a place that is hard to
see unless you drop the rear unit.
Ken
PS Very soon we should have quality reproduction rear AC Evaporators
available for the passenger Vanagon (I can also have new Westy Evaporators
made up if there is interest).
Ken
On Wed, Oct 26, 2016 at 4:26 AM, Raimund Feussner <ray@v6bus.de> wrote:
> Hello Group!
>
>
> After retrofitting the factory ´87 tintop A/C in my ´92 Vanagon in 2004,
> it seems it finally needs new hoses.
> Refrigerant keeps disappearing quicker and quicker...
>
> I re-used the stock ´87 hoses back then, and also the R12 expansion
> valve (working with R134a since the retrofit).
> For several reasons, I need to drop the evaporator anyway, so I think
> this is my best chance to replace all the old stuff including the
> expansion valve.
>
> Does anyone have the information about hose lengths, position of
> pressure sensors etc on paper?
> I want to get some quotes from hose suppliers, but don´t want to pull my
> hoses out upfront, just to learn it´s too expensive.
>
> I would prefer the later style hoses, with the trinary pressure switch
> instead the separate hi/low switches.
> I like to check the A/C myself as much as possible, and might need to
> remove the switch without losing refrigerant.
>
> Thanks for any help,
> I am struggling to get this information in Germany, as A/C are rare and
> servicing extremely expensive.
> A/C shops keep selling their services as some kind of magic still...
>
> History:
> In 2009, got the system filled by a shop, nice cooling effect.
> In 2014, system didn´t cool well, I added R134a via Walmart-style
> re-fill kit (12oz can and gauge).
> In 2016, system cooled okay´ish in the beginning, but faded quickly in
> the summer, now not even activating the compressor.
> Bridged the low pressure switch, compressor kicked in, but no effective
> cooling after a few minutes idling. No green leak detection fluid can be
> seen (only visual check at accessible areas without U/V light, no check
> in evap housing or detailed condenser check).
>
>
> Regards
> Raimund
>
--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com
|