> Installed new hi-lo switch and indeed, restored all functionality except driver lo beam, and driver front flasher when the parking light is on. The flasher works with all lights off from the dash headlight/parking light switch, same as other three flashers. Swapping the ignition switch for a new one had zero effect other than enriching Always Veedub another $15. Earlier, I made a passenger side common bodywork ground for headlight/turnsignal/flasher. They are all working perfectly. Do the same combined ground on the driver side? Return to tracing circuits? Ideas? I have SA headlights with wiring harness joining the inners to outer highbeam circuit. As I mentioned, the passenger side lo or hi, the initial problem, now work, but the driver lo and combined flasher and parking light (parking light works with other three) no longer do. The hibeam LED works as designed. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.