Date:         Sun, 23 Oct 2016 12:28:08 -0700
Reply-To:     Dan N <dn92610@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dan N <dn92610@GMAIL.COM>
Subject:      Re: '84 1.9L -- cannot remove crankcase drain screw -- what to do
              next?
Comments: To: David <fjazzbass@gmail.com>
In-Reply-To:  <CAGbP_PhMnidwxS6gyO8knPoTe_q+irym20xXNCE2aczL-paf8g@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

you should use a flexible plastic hose and insert either in the oil filler
tube or the dipstick tube - the dipstick tube is smaller and harder to get
in and out.... I use the oil extractor pump for long and no problem at
all....

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.