I was initially curious if engine compression was ok engine cold after it sat overnight. I assume you've checked that in spite of new heads etc? It's easy to make a fuel pump relay bypass jumper wire as shown in Bentley manual. Engine cold after it sat overnight, turn on fuel pump using jumper wire, listen to see if fuel is circulating through hoses in engine bay, try starting engine. Neil. On 11/5/16, Dan N <dn92610@gmail.com> wrote: > I will go over today, ..... check fuel pressure, .....
-- Neil n Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.