Date:         Fri, 11 Nov 2016 06:30:00 -0500
Reply-To:     Fjazzbass <fjazzbass@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Fjazzbass <fjazzbass@GMAIL.COM>
Subject:      Re: Floor boards
Comments: To: John Rodgers <jrodgers113@GMAIL.COM>
In-Reply-To:  <CA+az7_6G3rV_76uGi3htCjetnFNSJkFX6v3uBQMqZT9Qk3UQpA@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

Hi John...

What have you got to lose to try it and see if YOU  like it :-)

From what you say, it sounds like it would work well...especially because of its availability to you. I used a pergo flooring with foam already attached because I had a pile of it left over from another project I had...it's not my favorite, but it covers the sheet metal well.

My only concern with your solution would be the carpet sliding around on the smooth surface, but maybe it's more grippy than I'm thinking...

Have fun, it's Friday!!!

Dave

Sent from my iPad

> On Nov 11, 2016, at 12:49 AM, John Rodgers <jrodgers113@GMAIL.COM> wrote:
> 
> To the best of my knowledge, all the vans middle section has s type of
> corrugated steel floor, and some type of fitted floors board material to
> level out the floor for a smooth fitting carpet. The flooring material in
> my van is not there, just the steel floor.  I think I have some spotted,
> but wondered if it would me better to level the steel floor with the 3m
> sound deadening material I have on hand. It's a three inch wide mastic like
> tape that sticks down pretty well. I have used t in some places for sound
> desdening, but this floor leveling for carpet would be different.
> 
> What think The List?
> 
> John