Date:         Tue, 22 Nov 2016 13:57:03 +0000
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Replacing front end bushings, Hardware questions
Comments: To: T Collins <tonycollin@GMAIL.COM>
In-Reply-To:  <CAAzKkH_vVQ1vv1B-uHci4Gknh67fRrqe7B3UYdg_t_AtgS-Rxw@mail.gmail.com>
Content-Type: text/plain; charset="windows-1256"

Belmetric.com will have what you need including the fine thread property class 10.9 and lock nuts you need for this job. They also have a great selection of hoses and light bulbs.

Dennis,
From my phone.
________________________________
From: T Collins<mailto:tonycollin@GMAIL.COM>
Sent: ý11/ý22/ý2016 8:05 AM
To: vanagon@GERRY.VANAGON.COM<mailto:vanagon@GERRY.VANAGON.COM>
Subject: Replacing front end bushings, Hardware questions

Hello Volks,

Some of you may have seen my email about hitting a boulder.
Just as a recap passenger side wheel hit boulder while turning. Rim is
toast, caliper is toast, steering rack is toast (but it had it coming),
several bushings are goners too.

For those of you who have done the bushings, where did you source your nuts
and bolts for the following:
Radius bushings?
sway bar stabilizer bars?

Thanks,
T.