Date:         Tue, 22 Nov 2016 14:21:06 -0600
Reply-To:     Ralph Meyermann <ralphmeyermann@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ralph Meyermann <ralphmeyermann@GMAIL.COM>
Subject:      Re: Replacing front end bushings, Hardware questions
Comments: To: Ken Wilford <kenwilfy@comcast.net>
In-Reply-To:  <CANEuo0gaA2FEZUW6YndmTwcUTLuRe=H3BRM3akB54Z9aWGw4_g@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

I'm pleased with my set from Chris at T3!

On Nov 22, 2016 1:01 PM, "kenneth wilford (Van-Again)" <kenwilfy@comcast.net>
wrote:

> I have been using boltdepot.com
> Their prices are good and they ship stuff really quickly.  They have a nice
> supply of stainless steel metric hardware as well.
>
> Ken
>
> On Tue, Nov 22, 2016 at 8:57 AM, Dennis Haynes <d23haynes57@hotmail.com>
> wrote:
>
> > Belmetric.com will have what you need including the fine thread property
> > class 10.9 and lock nuts you need for this job. They also have a great
> > selection of hoses and light bulbs.
> >
> > Dennis,
> > From my phone.
> > ________________________________
> > From: T Collins<mailto:tonycollin@GMAIL.COM>
> > Sent: ‎11/‎22/‎2016 8:05 AM
> > To: vanagon@GERRY.VANAGON.COM<mailto:vanagon@GERRY.VANAGON.COM>
> > Subject: Replacing front end bushings, Hardware questions
> >
> > Hello Volks,
> >
> > Some of you may have seen my email about hitting a boulder.
> > Just as a recap passenger side wheel hit boulder while turning. Rim is
> > toast, caliper is toast, steering rack is toast (but it had it coming),
> > several bushings are goners too.
> >
> > For those of you who have done the bushings, where did you source your
> nuts
> > and bolts for the following:
> > Radius bushings?
> > sway bar stabilizer bars?
> >
> > Thanks,
> > T.
> >
>
>
>
> --
> Thanks,
> Ken Wilford
> John 3:16
> www.vanagain.com
>