Date:         Sun, 27 Nov 2016 17:39:41 -0800
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: No start hot
Comments: To: Skip Laubach <skiplaubach@gmail.com>
In-Reply-To:  <5070E975-BEB6-46DA-87F4-A10AB2745C7D@gmail.com>
Content-Type: text/plain; charset=UTF-8

> I wonder if NSH has more to do with "not enough air", less to do with more
> than normal fuel?  Does the AFM manage air at start up?

My guess is that even if the AFM flap didn't get pulled open when
cranking engine (it likely does though), the air bypass (CO adjuster
screw) would allow little air in. Details of the AFM being used as in
input to ECU when starting engine, might be mentioned in the Digifant
section of the Bentley? I know that section describes functions of
various inputs like the coolant temp sensor.

Zoltan: what engine? Coolant temp sensor and wiring to/from ok?

My thought regarding the fuel pressure residual test was dripping
injectors at shut off. Check the plugs once the hot start issue shows
up? See if they're wet with fuel?



On 11/27/16, Skip Laubach <skiplaubach@gmail.com> wrote:

> I wonder if NSH has more to do with "not enough air", less to do with more
> than normal fuel?  Does the AFM manage air at start up? I can't remember
> what significantly corrected my NSH, but it may have happened when I
> installed a new AFM.
> Skip
>
> Sent from my iPad
>
>> On Nov 27, 2016, at 1:56 PM, Neil N <musomuso@GMAIL.COM> wrote:
>>
>> residual fuel pressure test? See if fuel might be leaking out at
>> injector?


--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>