Date:         Tue, 22 Nov 2016 14:00:26 -0500
Reply-To:     "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Subject:      Re: Replacing front end bushings, Hardware questions
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <CY1PR20MB0029605400716623BDB1BCFDA0B40@CY1PR20MB0029.namprd20.prod.outlook.com>
Content-Type: text/plain; charset=UTF-8

I have been using boltdepot.com
Their prices are good and they ship stuff really quickly.  They have a nice
supply of stainless steel metric hardware as well.

Ken

On Tue, Nov 22, 2016 at 8:57 AM, Dennis Haynes <d23haynes57@hotmail.com>
wrote:

> Belmetric.com will have what you need including the fine thread property
> class 10.9 and lock nuts you need for this job. They also have a great
> selection of hoses and light bulbs.
>
> Dennis,
> From my phone.
> ________________________________
> From: T Collins<mailto:tonycollin@GMAIL.COM>
> Sent: ‎11/‎22/‎2016 8:05 AM
> To: vanagon@GERRY.VANAGON.COM<mailto:vanagon@GERRY.VANAGON.COM>
> Subject: Replacing front end bushings, Hardware questions
>
> Hello Volks,
>
> Some of you may have seen my email about hitting a boulder.
> Just as a recap passenger side wheel hit boulder while turning. Rim is
> toast, caliper is toast, steering rack is toast (but it had it coming),
> several bushings are goners too.
>
> For those of you who have done the bushings, where did you source your nuts
> and bolts for the following:
> Radius bushings?
> sway bar stabilizer bars?
>
> Thanks,
> T.
>



-- 
Thanks,
Ken Wilford
John 3:16
www.vanagain.com