Hello all, My 1991 GL with a 2.2 Subaru + a Manual Transmission has been having a shifting issue as in I've been having trouble getting into gear. The clutch kit is about 8 years old. Transmission was rebuilt 3 years ago. Last night when driving, it was a real struggle to get into 1st and 2nd second gears when the van was running. I had to slam the sucker in there, if that makes sense. Additionally, I've been getting some clutch chatter... I can shift through all gears when not moving and the engine off. If memory serves me right, this sounds like a pilot bearing/clutch issue vs. a bad master and or slave cylinder. Before I get to tearing things apart, I just wanted to confirm my thinking that I'm likely dealing with a clutch/pilot bearing issue. Thoughts and guidance appreciated Thanks, Jimmy Wilmington, NC |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.