Hi to all, So, I was trying to figure out why one of the cylinders is not working. Took out the plug and checked compression. 150. Great. So, then it could be the injector not working or something like that. Before taking out the injector, I swapped the yellow connectors. Voila, now the other cylinder did not work. Aha! So, there must be something wrong with the plug or something around there. Checked the plug, no continuity. But all the others had continuity. Hmmm. Then I cut into the wires to see if I can find continuity there. No. Solution; I stole power for that plug from the neighboring injector wires. Now, all is well. Sort of. The only question is; can I just leave it as it is or I have to change the whole harness? Zoltan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.