Date:         Mon, 19 Dec 2016 17:11:16 +0000
Reply-To:     Jim Felder <jim.felder@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Felder <jim.felder@GMAIL.COM>
Subject:      Re: At long last finally and looking at lots of little problems
              to come
Comments: To: Eric Wunrow <VW@ericwunrow.com>
In-Reply-To:  <DAE0600F-DFA8-4F64-8AB4-307F0E39F7F8@EricWunrow.com>
Content-Type: text/plain; charset=UTF-8

The white graphics on the stove/sink panel are screen printed. A decal
would probably look OK, but if you really want to do it right you could
have a sign shop cut a stencil vinyl and you apply that to a panel and
shoot white paint on it. Then you peel off the stencil and you have a
perfect effect that only a forensics specialist could tell from a screen
print. I have been tempted to produce such a stencil design file for years
but haven't gotten around to it. Anyone care to push me over the edge?

Jim

On Sat, Dec 17, 2016 at 10:37 PM Eric Wunrow <VW@ericwunrow.com> wrote:

> Ron, are the graphics screen-printed on?
>
>    Eric
>    Eric Wunrow Pictures
>    303. 988. 8717 <(303)%20988-8717>
>
>    VW@EricWunrow.com (for this list's emails)
>    EW@EricWunrow.com (for private messages)
>
>
>
> On Dec 14, 2016, at 9:21 PM, The Bus Depot <vanagon@BUSDEPOT.COM> wrote:
>
> >> It won't match your warm brown paint, but I'll bet you have some rust
> on the
> >> stove/sink cabinet panel and its top edge bracket anyway.  Strip and
> paint them too.
> >> GW has decals for the panel: http://www.gowesty.com/product-
> >> details.php?v=&id=4351
> >
> > If your water/battery level monitor panel has rust or chips, we sell
> entire replacements for only $22, new decals and all...
> >
> > http://www.busdepot.com/255070558g  (gray)
> >
> > http://www.busdepot.com/255070558a  (brown)
> >
> > Ron Salmon
> > The Bus Depot, Inc.
> > www.busdepot.com
> >
>