Date: | Thu, 5 Jan 2017 10:09:35 -0800 |
Reply-To: | Edward V Barger <edvbarger@MAC.COM> |
Sender: | Vanagon Mailing List <vanagon@gerry.vanagon.com> |
From: | Edward V Barger <edvbarger@MAC.COM> |
Subject: | Re: Engine Bay Zip Ties |
|
In-Reply-To: | <5D93DAB4-1ED9-4BF3-9846-2E659EB71558@comcast.net> |
Content-type: | text/plain; charset=us-ascii |
interested also need to neat up some wire but these state tat they are for indoor use
ed
Edward V Barger
edvbarger@mac.com
310 922 6251
> On Jan 5, 2017, at 8:17 AM, OlRivrRat <OlRivrRat@COMCAST.NET> wrote:
>
> How about these ~
>
> http://www.ebay.com/itm/25-Push-Mount-Cable-Tie-For-Imports-200mm-Length-New-/381778290851
>
> More here ~
>
> http://www.ebay.com/bhp/push-mount-cable-ties
>
> ORR ~ DeanB
>
> On 5 Jan , 2017, at 6:01 AM, Ryan Perry wrote:
>
>> Took a look at both and not seeing them as they are. But, it looks like
>> maybe the screw types could work if the hole is large enough to fit the
>> stud in the engine compartment.
>> Seems these would be available. I found these through an image search,
>> about as close as I can find.
>>
>> http://www.panduit.com/en/products-and-services/products/cable-and-wire-bundling/plastic-cable-ties/plastic-cable-ties-one-piece/specialty-ties/stud-mount/PLST4HS25-TL300
>>
>> I will try to get a picture and measurements, see if that helps.
>>
>> thanks for the info!
>> Ryan
>>
>> On Wed, Jan 4, 2017 at 11:22 PM <mfmagnani@sbcglobal.net> wrote:
>>
>>> Have you tried McMaster.com ?
>>> Mike M
>>>
>>> Sent from my iPhone
>>>
>>>> On Jan 4, 2017, at 7:18 PM, Ryan Perry <rjdperry@GMAIL.COM> wrote:
>>>>
>>>> Hey everybody, Happy New year!
>>>> If you remember a while back I had posted about my engine biting the
>>> dust.
>>>> We are now mid install of a spanky new GoWesty 2.2 engine. With the old
>>>> engine out I am cleaning the bay and noticed the zip ties that hold the
>>>> main harness around the edge of the bay have broken. They are unique
>>> with a
>>>> hole that allows a manufactured stud on the body to slip in and slide
>>> over,
>>>> then you just regular zip tie the wires. Need 2 of these, any idea where
>>>> they can be sourced? Suggestions otherwise? I'm a bit of a purist so
>>> would
>>>> like to try and find these if they still make them. Hopefully I
>>> described
>>>> well enough but can grab pictures too when I get back to the shop.
>>>> Thanks
>>>> Ryan
>>>> Asheville, NC
>>>
|