Date:         Thu, 5 Jan 2017 22:37:32 -0700
Reply-To:     OlRivrRat <OlRivrRat@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         OlRivrRat <OlRivrRat@COMCAST.NET>
Subject:      Re: Coolant level warning light - '88 GL - 2.1 WBX
Comments: To: John Rodgers <jrodgers113@GMAIL.COM>
In-Reply-To:  <CA+az7_6jx3bQXKx1BXWpS+-gZtbqB0NLs5QZWU2KabRo3QQ3ag@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

        Have You checked the CoolantLevel in the ExpansionTank ~ If that is OK then

it might be a Dirty Sensor or Bad Connections/Wires in the Circuit ~

On 5 Jan , 2017, at 2:35 PM, John Rodgers wrote:

> What does it mean when that light turns on without blinking. Solid red.
> Stays on. Engine does not get hot. Temp needle never moves off of the light
> spot once it's warmed
>
> Whats up with that!
>
> John

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.