Date:         Sun, 1 Jan 2017 22:31:29 -0500
Reply-To:     Eric Caron <ecaron1@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Caron <ecaron1@COMCAST.NET>
Subject:      Re: Go Westy sale item question
In-Reply-To:  <00cb01d2649d$f7c56e80$e7504b80$@gmail.com>
Content-Type: text/plain; charset=utf-8

Hi Stuart and all,

        I moved a pin in the opening this past summer and tried to adjust the spray.  Also had others try to adjust.  In the front they com out at different heights. Driver’s side wants to shoot over the window and passenger side can’t get high enough.  Rear one also only comes up to the bottom of the rear window.  I was thinking about replacing one at a time to see if I can get a reasonable spray.  the double one sounds like a possible upgrade. 

I wonder if before replacing I could take them off and try to air blow them cleaner? 
 But, anyone want to give me a description of how to carefully get it off? 

Eric Caron 
85 GL 

> On Jan 1, 2017, at 9:14 PM, Stuart MacMillan <stuartmacm@gmail.com> wrote:
> 
> Before you replace them have your driver stick a pin in the nozzle to clean it, and then adjust the nozzle to spray on the windshield by moving it with the pin inserted. Aim towards the top center of the sweep area.
> 
> Stuart
> 
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Eric Caron
> Sent: Sunday, January 01, 2017 12:20 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Go Westy sale item question
> 
> Hi folks,
> 
> Windshield  nosel both standard and dual are on sale.  I’ve heard complaints from my drivers that mine are not working very well.  Are these easy to replace?  Can they be done from the outside with no dash removal?  Is t the same for the rear one?
> 
> comments and tips appreciated.
> 
> Eric Caron 
> 85 GL =
>