http://www.ebay.com/itm/25-Push-Mount-Cable-Tie-For-Imports-200mm-Length-New-/381778290851
More here ~
http://www.ebay.com/bhp/push-mount-cable-ties
ORR ~ DeanB
On 5 Jan , 2017, at 6:01 AM, Ryan Perry wrote:
> Took a look at both and not seeing them as they are. But, it looks like
> maybe the screw types could work if the hole is large enough to fit the
> stud in the engine compartment.
> Seems these would be available. I found these through an image search,
> about as close as I can find.
>
> http://www.panduit.com/en/products-and-services/products/cable-and-wire-bundling/plastic-cable-ties/plastic-cable-ties-one-piece/specialty-ties/stud-mount/PLST4HS25-TL300
>
> I will try to get a picture and measurements, see if that helps.
>
> thanks for the info!
> Ryan
>
> On Wed, Jan 4, 2017 at 11:22 PM <mfmagnani@sbcglobal.net> wrote:
>
>> Have you tried McMaster.com ?
>> Mike M
>>
>> Sent from my iPhone
>>
>>> On Jan 4, 2017, at 7:18 PM, Ryan Perry <rjdperry@GMAIL.COM> wrote:
>>>
>>> Hey everybody, Happy New year!
>>> If you remember a while back I had posted about my engine biting the
>> dust.
>>> We are now mid install of a spanky new GoWesty 2.2 engine. With the old
>>> engine out I am cleaning the bay and noticed the zip ties that hold the
>>> main harness around the edge of the bay have broken. They are unique
>> with a
>>> hole that allows a manufactured stud on the body to slip in and slide
>> over,
>>> then you just regular zip tie the wires. Need 2 of these, any idea where
>>> they can be sourced? Suggestions otherwise? I'm a bit of a purist so
>> would
>>> like to try and find these if they still make them. Hopefully I
>> described
>>> well enough but can grab pictures too when I get back to the shop.
>>> Thanks
>>> Ryan
>>> Asheville, NC
>>