Date:         Sat, 14 Jan 2017 06:44:13 -0800
Reply-To:     "C. Abney" <tsudonimh@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "C. Abney" <tsudonimh@GMAIL.COM>
Subject:      Re: Oil temperature sender
In-Reply-To:  <CAEWkT8mz6nRmKWFRegfMx7Z4oQQUmg+nvrOi+Dvx_06tOOthbA@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

http://www.van-cafe.com/home/van/page_2543_919/oil_pressure_switch_adaptor.html

Http://www.van-cafe.com/home/van/page_357_919/oil-pressure-switch-grey-.75-1.05-bar.-mounts.html

On 1/13/17, Patrick Seurynck <climb12@gmail.com> wrote:
> I just recently took delivery of the Glowshift oil sender adapter along
> with their oil temp gauge and oil pressure gauge.
> I am excited to be getting them installed soon.
> Abel did a nice Samba write up on this mod.
> Patrick
>
>
> On Fri, Jan 13, 2017 at 7:26 PM OlRivrRat <OlRivrRat@comcast.net> wrote:
>
>>         I suggest leaving the OEM senders alone & adding 1 of these ~
>>
>>
>>
>> http://www.glowshiftdirect.com/oilfilter-sender-adapter-3-4unf-16.aspx
>>
>>
>>
>> http://prosportgauges.com/oil-filter-adaptor-plate.aspx
>>
>>
>>
>>                                                         ORR ~ DeanB
>>
>>
>>
>> On 13 Jan , 2017, at 4:37 PM, Robert Clemmer wrote:
>>
>>
>>
>> > I'm getting ready for a planned refresh/overhaul on my 91 2.1 wbx.  A
>> year
>>
>> > or so ago I read somewhere where someone installed an oil temperature
>> sender
>>
>> > on the rear of the engine where the grey oil pressure sender is
>> > currently
>>
>> > located.   I'm considering moving my oil temp sender from the oil drain
>> to
>>
>> > that location.
>>
>> >
>>
>> >
>>
>> >
>>
>> > Does anyone know of the sender p/n or the thread size of the adapter
>> plug in
>>
>> > the case that accommodates the pressure sender?  I wrote it down a year
>> or
>>
>> > so ago but cannot find where I put it.
>>
>> >
>>
>> >
>>
>> >
>>
>> > Thanks, Bob C
>>
>> --
> Sent from Gmail Mobile
>


--
It seems my TO-DO list is a FITO (faster-in-than-out)