http://www.homedepot.com/p/Gardner-Bender-1-lb-Plug-Duct-Seal-Compound-DS-11
>> 0/100212441
>>
>> You want something that won't harden but is sticky and flexible.
>>
>> Stuart
>>
>> -----Original Message-----
>> From: Edward V Barger [mailto:edvbarger@mac.com]
>> Sent: Friday, January 20, 2017 10:41 AM
>> To: Stuart MacMillan
>> Cc: vanagon@GERRY.VANAGON.COM
>> Subject: Re: Back again needing more help to find out what size the bolts
>> are that hold the pot top hinges to the top of the van
>>
>> Thanks
>>
>> Would a locktite product work or use silicone ?
>>
>>
>>
>> Edward V Barger
>> edvbarger@mac.com
>> 310 922 6251
>>
>>
>>
>>> On Jan 20, 2017, at 10:38 AM, Stuart MacMillan <stuartmacm@GMAIL.COM>
>> wrote:
>>>
>>> Also, these are sealed at the factory with a non-hardening sealant.
>>> Rain can leak through these holes when the top is up and will drip on
>>> the mattress if not sealed. BTDT.
>>>
>>> Stuart
>>>
>>> -----Original Message-----
>>> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On
>>> Behalf Of Edward V Barger
>>> Sent: Friday, January 20, 2017 10:08 AM
>>> To: vanagon@GERRY.VANAGON.COM
>>> Subject: Re: Back again needing more help to find out what size the
>>> bolts are that hold the pot top hinges to the top of the van
>>>
>>> I sure wish I had
>>>
>>> I am sure we put them in the same metal container with many other
>>> screws & bolts but over a year later who knows
>>>
>>> Will pick up a 6 mm x 1 inch at the hardware Saturday when near the
>>> place that caries MM to try as per Alistair
>>>
>>>
>>> Thanks guys putting this all back together is a challenge had to move
>>> it all from the shop where nothing was getting done to a neighbors
>>> back yard then to my garage where I can work on it as I get time First
>>> thing is getting to together enough to have the 93 Subie engine tuned
>>> up and then to be smog certified
>>>
>>> ed
>>>
>>>
>>> Edward V Barger
>>> edvbarger@mac.com
>>> 310 922 6251
>>>
>>>
>>>
>>>> On Jan 19, 2017, at 9:58 PM, OlRivrRat <OlRivrRat@COMCAST.NET> wrote:
>>>>
>>>> You didn't, by any chance, Wisely put them back into the holes
>>>> that
>>> they came out of ~
>>>>
>>>>
>>>>> On 19 Jan , 2017, at 3:29 PM, Edward V Barger wrote:
>>>>>
>>>>> Have the pop top setting on the top of the Vanagon ready to bolt
>>>>> and
>>> now can not find the bolts that hold the hinges to the top of the van
>>>>>
>>>>> It has been over a year since it was removed all the other bolts
>>>>> are in
>>> the container but some how the ones that hold the hinges are missing
>>> and the bentley does not
>>>>>
>>>>> have that information
>>>>>
>>>>> Please any help in this much appreciated
>>>>>
>>>>> thanks
>>>>> ed
>>>>>
>>>>> Edward V Barger
>>>>> edvbarger@mac.com
>>>>> 310 922 6251