Date:         Fri, 27 Jan 2017 09:30:05 -0800
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Gowesty reduction starter user input please
Comments: To: Richard Koerner <rjkinpb@sbcglobal.net>
In-Reply-To:  <236712231.2079388.1485462975308@mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8

Thanks the tips and input Richard.

I have a round and flat file. My only real concern doing this
repair "in the field" is snapping the starter mount stud at clutch housing;
AFAIK, it needs to be removed for installation of starter adaptor plate.

Neil.

On Thursday, January 26, 2017, Richard Koerner <rjkinpb@sbcglobal.net>
wrote:

Neil,  Karl's adapter and a Bosch starter work great; that's what I used to
> replace the starter on my 2.2 Subie engine conversion (with the KEP
> plate).  One thing you will need to do to the starter however is file a
> "notch" in the aluminum flange of the starter to provide clearance for one
> of the mounting bolts.  I used a 1/2" diameter round file to accomplish
> this; only took 10 minutes of filing.  The size of this "notch" is about
> the size of a nickel.  So if you are on the road a stop at Home Depot or
> equivalent to buy a file might be necessary.
>
> Just don't want you to get halfway into the job to discover this...
>
> Somewhere there is a photo of this "notch"....I can't seem to find it.
> Maybe someone else can send a link.
>
> Rich
>
> San Diego
>
>
> ------------------------------
> *From:* Neil N <musomuso@GMAIL.COM
> <javascript:_e(%7B%7D,'cvml','musomuso@GMAIL.COM');>>
> *To:* vanagon@GERRY.VANAGON.COM
> <javascript:_e(%7B%7D,'cvml','vanagon@GERRY.VANAGON.COM');>
> *Sent:* Thursday, January 26, 2017 12:26 PM
> *Subject:* Re: Gowesty reduction starter user input please
>
>
> I was, and may still be leaning towards your adaptor plus TDI starter
> setup, but am Leary of trying to remove the starter stud at clutch housing
> while on this road trip; I'm not equipped to deal with a snapped stud....
> If I'm not misunderstanding the instructions I see on vancafe a web
>


--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>