On Thu, 2 Feb 2017 17:06:45 -0800, Neil N <musomuso@GMAIL.COM> wrote: >Thanks Michael. That is what I ended up doing. Spins great! The off shore >starter also needed to have material removed to accomodate the lower >fastener that replaces the OEM stud. Using my manual adaptor? There is no reason to remove anything from the lower bolt area. There should only be clearance needed for the top through-bolt to clear the nut or bolt head. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.