Date:         Fri, 3 Feb 2017 18:58:36 -0800
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Gowesty reduction starter user input please
Comments: To: Karl Mullendore <tdiguru@westyventures.com>
In-Reply-To:  <vanagon%2017020319132022@GERRY.VANAGON.COM>
Content-Type: text/plain; charset=UTF-8

Apologies Karl. Got a little mixed up. Yes I used your manual adapter. And
yes, I clearanced the starter for the top fastener.

D-oh,   ;)

Neil.

On Friday, February 3, 2017, Karl Mullendore <tdiguru@westyventures.com>
wrote:

On Thu, 2 Feb 2017 17:06:45 -0800, Neil N <musomuso@GMAIL.COM <javascript:;>>
> wrote:
>
> >Thanks Michael. That is what I ended up doing. Spins great! The off shore
> >starter also needed to have material removed to accomodate the lower
> >fastener that replaces the OEM stud.
>
> Using my manual adaptor? There is no reason to remove anything from the
> lower bolt area. There should only be clearance needed for the top
> through-bolt to clear the nut or bolt head.
>


--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>