hi all, could anyone help me with this idle adjustment problem... 1988 WBX engine, manual trans - full tune up with new spark plugs, dist. cap, rotor, oxygen sensor, air filter, fuel filter, oil change - new vacuum hoses - replacing throttle body with a good used one because of bad TB switch - the switch has clicking noise just off idle.. - replace AFM with a rebuilt one 6 months ago - new cat. converter /muffler 3K miles ago After replacing throttle body the idle stays at 1100/1200 rpm - the big screw on the throttle body is ALL THE WAY in, if I back it out the idle will rise so the question is why and how to fix this... I appreciate any help... thanks in advance dan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.