VANAGON archives -- February 2017, week 4 (#47)

Date:         Sun, 26 Feb 2017 09:05:41 -0500
Reply-To:     Ed <email99@BELLSOUTH.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ed <email99@BELLSOUTH.NET>
Subject:      Re: How to fix the foil
The copper foil tape, after trimming to proper width, looks to be the
ideal material to fix/replace damaged foil at the main connector.  Is
this where you have used it and does it work well?

www.findtape.com/JVCC-CFL-5CA-Copper-Foil-
Tape/p329/vid=2113&bc=F&c=US&gclid=CKql1seBqNICFdq6wAodpkkFEw

On Thu, 23 Feb 2017 23:37:34 -0600, KI4TLF <ki4tlf@GMAIL.COM> wrote:

>I've used
>
>http://www.all-spec.com/Catalog/Soldering-Rework/PCB-Board-Assembly-
and-Repair/Circuit-Board-Assembly-Repair-Kits/115-5205-10123
>
>and
>
>http://www.findtape.com/JVCC-CFL-5CA-Copper-Foil-Tape/p329/?
vid=2113&bc=F&c=US&gclid=CKql1seBqNICFdq6wAodpkkFEw
>
>Depending on what type of repair I needed to do.  I've also used the
rear window defroster, wire type, repair kits for short breaks or cracks
in the strips.
>
>GregM
>

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.