The striker plate can be moved inward. Or outward. Zoltan -----Original Message----- From: Dan N Sent: Tuesday, March 14, 2017 4:04 PM To: vanagon@GERRY.VANAGON.COM Subject: sliding door not sitting flush hi all, after replacing all the bearings, the rear side (left if looking straight on) of the sliding door on my '88 van is not sitting flush with the body... the front side is OK, door height is correct all a round... I followed the Bentley (58.17) to the letter but no deal... so... is there a trick? thanks for any help dan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.