Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2017, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 10 Mar 2017 07:36:30 -0600
Reply-To:     Frank Condelli <RAlanen@AOL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: Front heater motor
Content-Type: text/plain; charset=utf-8

SMALL job ? if you completely refurbish that heater box, removing rust from the metal flaps and heater core cover, rust painting the rusted parts, cleaning all the dirt out from the plastic housing, installing all new foam seals where needed (everywhere in my experience), installing the motor, maybe replacing the ballast resistor and the more than likely the leaking heater core, putting the heater box all back together and repairing any broken plastic pieces, replacing any of the four plastic clips that hold the footwell flap in place, installing the 11 clips needed to hold the heater box together (unless someone before you had that box apart and used the clips), drilling, tapping any of the four mounting screw holes that hold the heater box on the firewall plus adding new acres as necessary, repairing or replacing any of the four control cables, maybe replacing the front heater valve if it’s leaking (more than likely) and then dealing with all the screwed up wiring under the dash that previous intruders have left in a mess and R&R the dash and all the stuff that may need repaired or replaced in that process, there is no way this is a SMALL job and I surely will not do all that for $350 ! Did you look at my document on the repair of the front heater ? <http://www.frankcondelli.com/heater.htm>

> On Mar 9, 2017, at 11:00 PM, Automatic digest processor <LISTSERV@GERRY.VANAGON.COM> wrote: > > Yeah, back when I was starting out doing stuff, it took me very long. > Now, it's a small job.

Please note that I will be away from my business travelling from December 01 until April 30, 2017. Parts orders will be processed although not as quickly as usual. I will always be available for contact by E-mail. If you phone your call will be addressed by Steven and he will either call you back or advise you to contact me directly by E-mail.

Cheers, Frank Condelli Almonte, Ontario, Canada '87 VW Westy, '00 Kawasaki 250 Sherpa, "98 Ducati 750 Monster & Lionel Trains (Collection for sale <http://frankcondelli.com/trainsal.htm>) Frank Condelli & Associates <http://www.frankcondelli.com/> - Vanagon/Vanagon Westfalia Service in the Ottawa Valley BusFusion <http://www.busfusion.com/> a VW Camper camping event, Almonte, ON, June 08 ~ 11, 2017


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.