Date:         Sun, 26 Mar 2017 17:25:13 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: Both temp light and gauge not working
Comments: To: B Feddish <uprightbassghost@hotmail.com>
In-Reply-To:  <CY1PR0601MB127607E97E103993C03EB6DCCE300@CY1PR0601MB1276.namprd06.prod.outlook.com>
Content-Type: text/plain; charset=UTF-8

The first issue is caused by the old-style coolant level controller
triggering (or of course by the engine overheating or the temp sender line
shorting to ground).  Triggering caused by coolant below mid-level in the
pressure bottle or open circuit anywhere in the level sender line to the
controller, usually at the level sender plug.

Current issue, startup blink says gauge is getting power.  Trouble is open
circuit in the gauge sender or the line from sender to the gauge.  Since
you have the old controller, pull the plug off the level sender.  If the
gauge pegs and blinks then the problem is *not* at the panel connector but
farther back, likely at sender connector.  If no peg/blink then fold the
panel connector open and very carefully tweak the spring contacts to have a
bit more spring in them.  If no cure and gauge mounting nuts are snug
you'll have to track it with a meter.

Yrs,
d

On Sun, Mar 26, 2017 at 4:17 PM, B Feddish <uprightbassghost@hotmail.com>
wrote:

> Over the last few years I’ve had intermittent issues where, when driving,
> the temp gauge will go all the way to the right and the light will start
> flashing.   After a  bit it will go back tor normal. Now, the gauge does
> not even move.   The light will blink when the keys go in the ignition but
> the temp gauge never leaves the far left.
>
>
>
> Bryan
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
>
>
> *From: *David Beierl <dbeierl@attglobal.net>
> *Sent: *Sunday, March 26, 2017 2:35 PM
> *To: *B Feddish <UprightBassGhost@hotmail.com>
> *Cc: *vanagonlist a <vanagon@gerry.vanagon.com>
> *Subject: *Re: Both temp light and gauge not working
>
>
>
> Say more specifically what the symptoms are?
>
>
>
>
>
>
>