Date:         Sat, 1 Apr 2017 02:16:23 +0000
Reply-To:     David <fjazzbass@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David <fjazzbass@GMAIL.COM>
Subject:      Re: Makeshift Clutch Alignment Tool
Comments: To: Larry Alofs <lalofs@gmail.com>
In-Reply-To:  <ok89kyvl476i5brj2anhau1w.1491000045172@email.android.com>
Content-Type: text/plain; charset=UTF-8

Thanks all- I started with a ratchet handle but had a little more center
alignment with a deep socket on an extension...  worked pretty well and the
engine slid into place pretty well once we had all of the alignments of the
bolts 😁

On a side note, a Harbor Freight transmission jack made all the difference
in getting the engine lined up- dials for the platform and a ratchet strap
to hold it down to the jack plate.

Thanks all.

Dave
On Fri, Mar 31, 2017 at 6:41 PM Larry Alofs <lalofs@gmail.com> wrote:

> Input shaft from a junk transmission?
>
>
> David <fjazzbass@gmail.com> wrote:
> >Just like the subject line says...any recommendations or do I wait to get
> >it ordered? I can't find the one I'd been hanging on to for the past
> decade
> >😫
> >
> >Thanks in advance....
> >
> >Dave
> >85 GL with big ol empty engine cavity...
>