Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2017, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 29 Mar 2017 13:26:43 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: Windows, Electric, Failure
Comments: To: Stuart MacMillan <stuartmacm@gmail.com>
Comments: cc: Neil2 <vidublu@gmail.com>
In-Reply-To:  <007701d2a8b0$31e0c410$95a24c30$@gmail.com>
Content-Type: text/plain; charset=UTF-8

'86 is 2.5 mm^2, '87+ 1.5 mm^2. Diagrams are on 97.187 ff.

Yrs, d

On Wed, Mar 29, 2017 at 1:16 PM, Stuart MacMillan <stuartmacm@gmail.com> wrote:

> Hi Neil, > > > > Not sure which GW kit you are referring to. They have a switch relocation > kit to put the switches on the dash and the Spal kit for manual window > conversion only, which won’t work for you unless you also replace the > regulator with a manual regulator. > > > > I’m not familiar with Vanagon power windows, but most of the wiring I > think is 18 ga. > > > > Stuart > > > > *From:* Neil2 [mailto:vidublu@gmail.com] > *Sent:* Wednesday, March 29, 2017 9:33 AM > *To:* Vanagon Mailing List; Stuart MacMillan; David Beierl > *Subject:* Windows, Electric, Failure > > > > Hey volks, > > > > I need to do a quick and dirty repair to my PS window circuit. I have > reason to believe there is an open at the usual spot (door hinge) and am > not convinced I want a GW kit but need the window working for a driveabout > next month. My plan for a temp fix is to simply cut the open out and > replace with new wire using bullet connectors on either side. I don't yet > have the door open so am wondering what the wire gauge is? These are the > priority issues I need to resolve ASAP. > > > > Nice to know: > > > > 1. Does the GW harness just patch into the connection behind the glove > box for the PS window or does it extend all the way to the PS switch? > > 2. Is it practical to remove the OEM door section of the circuit after > the GW kit is installed? > > 3. Is it practical or preferable to R&R the PS door section of the OEM > circuit? > > > > Please/thanks! > > > > -- > > Neil2 > '82 Diesel Westfalia (Ducky) > '86 Vanagon (SaVannah) > '08 170" 2500 Mega Roof Sprinter (Moby) > > '90 Westfalia Subagon (SaL) > Fulltiming since August 2008 > Nunquam Pendite Divendium >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.