Thanks for all Van Cafe is out of stock and do not know when will have more The fasteners were not on the Go Westy site but when I called they checked with some one in the shop and sure enough they have them so problem solved I also got fasteners for the lower front grill there these are on the web site
ed Edward V Barger edvbarger@mac.com 310 922 6251
> On Apr 6, 2017, at 4:51 PM, Jim Felder <jim.felder@GMAIL.COM> wrote: > > Yes the two are different widths on the top surface which doesn't matter as > that is covered by the intake. What matters is will the snap-in portion on > the backs fit into the square hole in the vent metalwork, and it appears > that it will. > > Jim > > On Thu, Apr 6, 2017 at 6:48 PM Dan N <dn92610@gmail.com> wrote: > >> one of these may work... >> >> >> http://www.oreillyauto.com/site/c/search/Interior+Trim+Clips/N0279/C0329.oap?page=4&results=20&sortBy=1 >> >> may be this >> >> http://www.oreillyauto.com/site/c/detail/DORN/461240BP/N0279.oap?pt=N0279&ppt=C0329 >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.