Date:         Thu, 6 Apr 2017 17:34:43 -0700
Reply-To:     Edward V Barger <edvbarger@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Edward V Barger <edvbarger@MAC.COM>
Subject:      Re: Plastic part for the louvered rear vents
Comments: To: Jim Felder <jim.felder@GMAIL.COM>
In-Reply-To:  <CAFnDXk1GGjTwY_tq7uN2ojebWrTcmHbJxLOgxXH=puh1_KVxiA@mail.gmail.com>
Content-type: text/plain; charset=us-ascii

Thanks   for all 

Van Cafe is out of stock and do not know when will have more

The fasteners were not on the Go Westy site but when I called they checked with some one in the shop and sure enough they have them 

so problem solved  

I also got fasteners for the lower front grill there  these are on the web site 


ed

Edward V Barger
edvbarger@mac.com
310 922 6251



> On Apr 6, 2017, at 4:51 PM, Jim Felder <jim.felder@GMAIL.COM> wrote:
> 
> Yes the two are different widths on the top surface which doesn't matter as
> that is covered by the intake. What matters is will the snap-in portion on
> the backs fit into the square hole in the vent metalwork, and it appears
> that it will.
> 
> Jim
> 
> On Thu, Apr 6, 2017 at 6:48 PM Dan N <dn92610@gmail.com> wrote:
> 
>> one of these may work...
>> 
>> 
>> http://www.oreillyauto.com/site/c/search/Interior+Trim+Clips/N0279/C0329.oap?page=4&results=20&sortBy=1
>> 
>> may be this
>> 
>> http://www.oreillyauto.com/site/c/detail/DORN/461240BP/N0279.oap?pt=N0279&ppt=C0329
>>