Hi, I have determined that I need to repack at a minimum, more than likely put new bearings & spacer in the rear passenger side of my 91 Westy. I watched a step by step on The Samba ( https://www.thesamba.com/vw/forum/viewtopic.php?t=670910&highlight=bearing+spacer ) In this "step by step", the person had the bearing housing removed from the vehicle. Looking at my vehicle, it looks like that would require removing the backing plate which would require disconnecting the brake lines, etc. I also watched a video ( https://www.youtube.com/watch?v=_pDzWH0GebQ&ab_channel=ThomasEXOVCDS ). In the video, he did the bearing job with the bearing housing "in place", working from the back. I don't have a hoist, so I'd be doing it on a crawler laying on my back. Nothing I saw in either scared me too much. But the devil is in the rusted fastners! lol. I could pay for a shop to do this, but this is something I fell pretty comfortable with. I've been doing my own wheel bearings, brakes, basic maintenance on all my vehicles all my life. Am I opening a can of worms trying to do this on my own? It looks like I'd have to buy some long drifts, and not sure how I'd pop the grease seal out if I do it "in place". It looks like a long reach, though if I'm replacing the seal, I could just punch it out from the outside of the vehicle. What is the "list wisdom" of a DIY rear wheel bearing grease? Any bad gotcha's? I'd likely dive in the CV joints at the same time give that I'd have the shaft out anyway. Thanks, Steve Williams |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.