Next, check all 4 fan speeds for the AC. In particular, speed 3. Does speed 3 work? If fan speed 3 works, you need a helper for the next quick check. Make sure the front fan switch is set to speed 1. Put your hand on the AC relay. It is the one in the back that is tallest and has the most wires. With the key on, while rotating the front temp switch from OFF to Coldest and back, does the AC relay click in your fingers each time? Mark vw_van_fan_Mark wrote: > Make sure you turn the temp setting all the way to coldest. > If you don't hear the condenser fan or any relay clicking, > check fuse #12 of the main dash fuse panel. > > Mark > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.